Sunted radio transmitters

TELETASTER® Sunted®

Automatic controls
Handheld transmitters
Display transmitters
Bidirectional radio controls
Accessories
Project controls

SUNSHADE CONTROLS

SunTed® - Radio transmitters

Whatever requirements you place on sun protection, our high-powered transmitters can offer you customised solutions. Our range spans between classical handheld radio transmitters via flexibly usable wall transmitters right up to clock transmitters with flexibly programmable switching times.

Radio dusk detector

The SKX D enables automatic opening of shutters, blinds or other window blinds in case of dusk. The dusk sensor is simply attached to the inside of the window. No time-consuming installation of control cables required. The SKX D offers very user-friendly operation & commissioning and an LED indicator.

SKX D

Transmission frequency

434 MHz

Coding

X-coding, learnable

Application

dusk sensor

Dusk limit value

40 Lux

Operating temperature

-20°C tot +55°C

Housing dimensions

79 x 40 x 18 mm

Fixing

using sucker

Protection class

IP 42

Conformity declaration

Radio solar sun and dusk detector

We have developed the radio solar sun and dusk detector for practical control of blinds. The radio transmitter is powered by solar cell and permanently saves all the brightness values it learns. The unit can be used indoors and outdoors. No need for costly cable laying. Just attach the transmitter to the window pane with the sucker, or use the supplied acrylic glass container to position it inside the room. A weatherproof housing is also available as an accessory for optimum protection outdoors.

SKX SD

Transmission frequency

434 MHz

Coding

learnable

Operating modes

selectable

indoors or outdoors

- sun and dusk sensor

- sun sensor only

- dusk sensor only

- sensor can be switched off

Memory-capable brightness values

learnable

Sun limit value

ca. 5.000 to 6.000 Lux

Dusk limit value

ca. 9 to 500 Lux

Cloud suppression time

10 to 60 minutes

Supply voltage:

- by day

solar cell

- at night

lithium button cell 3 V, type CR2032

Battery service life

ca. 4 years

Operating temperature

-20°C to +55°C

Housing dimensions

79 x 40 x 18 mm

Fixing

using sucker

Protectoin class

IP 42

Accessories:

for outdoor use

weatherproof housing

for indoor use

acrylic glass holder

Conformity declaration

Multi-channel handheld transmitter

The high-powered radio handheld transmitter in the K 512 series can implement up to 72 switching commands. A press of a button is enough to activate a sunshade or other object. Function displays are made using LEDs.

SKX12M2W

SKX24M2W

12 x 2

channels

switching commands

24 x 2

channels

 switching commands

Coding

using coding switch in battery compartment behind battery

Display

LED function display

Automatic switch-off

after 20 seconds

Battery

9 V block-battery

Dimensions

115 x 60 x 20 mm

Conformity declaration

Handheld transmitters SKX1GSW, SKX2GSW, SKX4GSW

The handheld transmitters in the Teletaster® K 512 series, which are colour- matched to the wall switch version, offer you customised solutions with their mobile, high-power transmitters and matching receivers. You can also fit your handheld transmitter in any location using the practical wall holder (available as accessory).

SKX1GSW

SKX2GSW

SKX4GSW

channel

channels

Dimensions

75 x 45 x 16 mm

Application

Transmitter for mobile applications for implementation of one to four switching commands

Coding

The coding takes place using a coding switch which is located in the battery compartment above the battery

Battery

12V battery MN21

Housing

Plastic, white - grey glossy

Display

LED function display

Conformity declaration

Handheld transmitters SKX2WD, SKX4WD

Weatherproof midi handheld transmitter with one coding switch

SKX2WD

SKX4WD

channels

Dimensions

78 x 51 x 15 mm

Application

Transmitter for mobile applications for the operation of 1 or 2 sunshade units

Coding

Via coding switch

Battery

12V battery MN21

Protection class

IP54

Conformity declaration

Handheld transmitter SKX4WD-SW

Midi handheld transmitter with one coding switch and special sun automatics ON/OFF function

SKX4WD-SW

channels

Dimensions

78 x 51 x 15 mm

Application

Transmitter for mobile applications for the operation of one sunshade unit

Coding

Via coding switch

Battery

12V batterij MN21

Protection class

IP 54

Conformity declaration

Radio wall transmitter

The flat wall transmitter with integrated 2 or 4-channel transmitter has a wide range of possible applications. It controls blinds and sunshade equipment, external lighting and alarm units, fanlights and ceiling fans. Transmitter installation is extremely simple - just glue it or screw it flat onto the wall without an outlet socket. You can use it as single, group or central controller.

SKX2W

~~SKX2WT~~

SKX4W

Transmission frequency 434 MHz

Number of radio channels

Number of codings freely selectable

Learnable coding

Timer function

Switching times per day (automatic)

Daily program

Weekly program

Switchover automatic/hand

Swithcover channels 1+2 / channels 3+4

Supply voltage 3 V DC

Battery lithium button cell CR2032

Battery service life at 10 acknowledgements per day

ca. 3 years

Operating temperature -10°C to +55°C

Dimensions including cover frames 80 x 80 x 12 mm

Cover frames can be glued and screwed

+ series

- not available or non-functioning

Conformity declaration

Clock-transmitter

The SunTed(r) clock transmitter controls blinds, sunshades and Venetian blinds - manually or automatically, as single, group or central controller. Programming it is not complicated: you have free choice of the daily switch times, even during your holidays. The available transmitter range is matched to the requirements of your house.